![]() I have a Netgear EVA700 UPnP multimedia device on my network that is attached to my entertainment center, and my tests showed that the Media Vault worked fine with it. My compatibility tests showed that the shared folders could be mounted and used from both my Macintosh and Linux systems. Along with the standard SMB support, the folders could also be set up for access via NFS, web browser, and FTP.Įven though the Media Vault is geared toward Windows users, the support for these other protocols meant that other operating systems can also use the device. A submenu had some interesting features related to setting up a shared folder. Note that the total supported capacity from all drives cannot exceed 1.2 Terabytes.Īlong with status, the screen also enabled me to create new network shares, restrict network access and delete shares, among other options. HP supports disks formatted in FAT32 and ReiserFS, and NTFS in read-only mode. The Shared Folders screen showed that along with two internal drives, I had an external FAT-formatted drive plugged into one of the USB ports. When I selected Browse Shared Folders, a screen appeared, showing the status of the device’s shared folders (as shown in Figure 4). Figure 3 shows the initial screen where you are presented with the option to configure the device or browse your shared folders. If you selected the customization option, a web browser appeared and connected you to the Media Vault. Like nearly all NAS devices on the market, the real configuration of the device was performed using a web browser. Additional configuration options are available under the “Customization” selection for more advanced users. ![]() For consumers with simple needs, setting up the first two options would complete their installation. The second option allowed you to map a drive letter to the shares for more permanent access. The browsing option from the Main menu brought up the Windows explorer where I could explore the default shares of the device. After the installation, I was greeted with a screen from the new application (shown in Figure 2). Once the device started up, I installed the Windows-only configuration software in my MacBook Pro, which was running Windows XP natively-courtesy of its Intel Core Duo processor. When I plugged in my Ethernet cable and powered up the MV2020, I expected the fan to make as much noise as a fan in a tower PC, but instead I found it to be fairly quiet. My review MV2020 also had a 500GB drive installed in the expansion bay thereby giving me a total of 1TB of storage. The size is in part due to the expansion bay where you can add an additional SATA drive for additional storage or a RAID array. Instead of being the size of an external drive, the Media Vault is comparable in size to a “thin client” or managed PC. Physically, the MV is larger than most consumer NAS devices on the market. For this review, I was supplied with the 500GB model. ![]() ![]() The Media Vault, HP’s initial entry into the consumer or “small-office” NAS market, offers gigabit Ethernet and RAID mirroring and comes in two models: one with a 300GB drive and one with a 500GB drive. In this review, I’m going to check out the Hewlett Packard Media Vault (MV), a device from one of the heavyweights in computers and consumer electronics. There are several options in the market for RAID-capable NAS devices. RAID adds redundancy to help reduce your loss if a disk failure occurs. Also, if you want extra protection for your data, options are available for that as well, since manufacturers are beginning to offer RAID features in consumer devices. The available NAS devices are handy and flexible enough to handle the massive amount of data that people accumulate. If you’re in the market for a consumer-level network-attached storage (NAS) device, you have a lot of options these days. Dual-drive NAS with RAID 0, 1 and built-in media and print servers ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |